10.95" Front Disc Brake Kit (Stage 1)

$575.00

Please, select one

Some factory sway bars require rear mount calipers

Select the previous option first

Select the previous option first

'72 and older A-Bodies with stock upper control arms require upper ball joint tapered adapters. You must also install '73-'76 A-Body lower ball joints.

Select the previous option first

Rotors are drop shipped from supplier and may require an additional week. Additional time required for drilled/slotted/plated option(s).

Select the previous option first

Select the previous option first

Select the previous option first

In stock
+
Add to wish list

Mopar 10.95" front disc brake kit includes all new hardware.  The package fits '62-'72 B-bodies, '67-'76 A-bodies and '70-'74 E-bodies. This is the largest OEM-style brake package that fits 14" disc brake spec wheels.

Included in kit:

  • Powder-coated calipers with brake pads
  • Reproduction 10.95" cast iron caliper brackets
  • Reproduction Forged Steel Knuckles
  • Plain, or drilled/slotted/plated 10.95" rotors
  • Rubber or DOT stainless flex hoses
  • Timken Set 17 (A17/BR17) inner bearings
  • Timken Set 2 (A2/BR2) outer bearings
  • Grease Caps
  • Splash Shields
  • Hardware

Sway bars affect installation:

  • Install calipers facing the front on all E-Bodies.
  • Install calipers facing the front on A-bodies equipped with '73 and newer sway bars (passes through the K member), or no sway bars.
  • Install calipers facing the front on B-bodies equipped with '70 and newer sway bars (passes through the K member), or no sway bars.
  • Install calipers facing the rear on '72 and older A-bodies equipped with sway bars (bolts under the K-member).
  • Install calipers facing the rear on '69 and older B-bodies equipped with sway bars (bolts under the K-member).

 

EXPLODED VIEW: Mopar A/B/E body front disc brake assembly. See below:

NOTE: Mount calipers facing REAR of vehicle for '72 and older A-bodies and '69 and older B-bodies.
NOTE: Mount calipers facing FRONT of vehicle for '73 and newer A-bodies, '70-'72 B-bodies and all E-bodies.

Exploded view

NOTE:  The outer brake pads must be custom fit by bending the tabs tight against the caliper.  Otherwise, they will rattle during operation.  See below:

Bend tabs tight against caliper

NOTE: Caliper clip orientation.  See below:

Caliper clip orientation

Customers also bought . . .

 

$365.00
'62-'67 B-Bodies
DoctorDiff A, B and E body Mopar suspension rebuild kits offer substantial savings versus buying each component individually and include fully assembled upper control arms.
In stock
 

Mopar A, B, and E Body front brake line selector allows you to pick hard lines and flex hoses for your car, master cylinder, and disc or drum combination.

In stock

$298.00
8 3/4" w/30 spline carrier

30 or 35 spline, 5 X 4 1/2" bolt pattern axle package for 8 3/4" or Dana 60 with lug studs and Green sealed wheel bearings INSTALLED.

In stock