.
Dana 60 bearing rebuild kit includes quality Koyo bearings
Koyo carrier bearings for Dana/Spicer 60.
DoctorDiff Dana 60 heavy duty 4-pinion clutch sure-grip ("Powr-Lok") posi includes upgraded 1 piece 35 spline side gears. Unit is built with OEM Spicer clutch pack.
Premium quality Dana 60 cover gasket
Dana 60 Eaton Truetrac fits standard rotation, 35 spline Dana 60 rearends equipped with 3.54-4.30 street gears.
Lightweight 35 spline spool fits all Dana 60 castings and all ratios.
Handy kit includes the small parts required to perform a Dana 60 gear swap.
Dana 60 pinion seal
Reproduction '66-'68 or '69-'72 Mopar passenger car Dana 60 pinion snubber.
Motive Performance ring and pinion fits Dana 60 rearends with standard 29 spline pinion yokes
Professional tool removes ALL popular carrier bearings quickly and easily with no damage to the bearing.
28 spline Ford 8" Traction Lock posi.
Ford 9" aluminum third member w/ heavy duty case, "Daytona" pinion support, 1350 pinion yoke, 31 spline traction lock, Koyo bearings, and choice of gears.
Ford 9" solid pinion bearing spacer kit includes shims used to set pinion bearing preload. Kits for standard or heavy duty "Daytona" pinion support.
Ford 9" nodular iron third member w/ heavy duty case, "Daytona" pinion support, 1350 pinion yoke, 31 spline traction lock, Koyo bearings, and choice of gears.
Super duty FORGED STEEL 1350 or 1330 28 spline U-bolt pinion yoke (4" long). Yoke is black oxide plated for corrosion protection. Package includes U-bolts.
Motive Performance Ford 9" street/strip 3.50, 3.70 or 4.11 ring and pinions set up easily and run quiet
Ford 9" third member with original case, pinion support, and 1330 pinion yoke. New forged steel traction lock, Koyo bearings, and your choice of gears.
28 or 31 spline Ford 9" Traction Lock posi.
Pair Ford 8" and SMALL Ford 9" wheel bearing kit
Precision Set 20 (A20) tapered wheel bearing kit includes 2 bearings, 2 lock rings, 2 external oil seals and your choice of 2 old style (1/2" bolt holes) or late (3/8" holes) big Ford bearing retainers. Fits Torino, big Ford new style housing ends.
3/8"-24 x 1 1/4" T-bolts and nuts
Ford Motorcraft limited slip additive is recommended for Mopar 8.75" and Dana 60 clutch or cone style sure-grips. 1 bottle controls clutch sticking and chatter.
Mopar Green Bearings for 8 3/4" and Dana 60 rearends
Includes gaskets, and seals
Spring perches fit GM 12 bolt, Mopar 8 3/4", Dana 60, Ford 9" and other rearends.
3 degree pinion angle shims (wedges) fit Mopar 8 3/4", Ford 9", Dana 60, Dana 44 and any axle housing with 2.5" wide leaf springs and 5/16" center bolt.
OEM Mopar 3/8"-24 x 1 1/4" housing end studs and nuts used to secure Mopar 8 3/4" and passenger car Dana 60 brake backing plates and wheel bearings.
Zinc plated vent bolt retains the brake tee located on most Mopar rear wheel drive vehicles
New, nodular iron Ford 9" case includes forged steel caps and billet adjusters installed. Choice of carrier bore for 28/31 spline axles or 35 spline axles.
Choose pinion nut and washer for Dana 60, Mopar 9 1/4", or Mopar 8 3/4" pinions.
QA1 JJC-AC0320 performance driveshafts are built with 3.2" diameter carbon fiber tubing, wound in-house with a resin specifically designed for high performance applications
Choose ring gear bolts for Mopar 8 3/4" or Dana 60
Package fits aftermarket axles tapped for 1/2" screw-in studs. Use with disc brakes and thick wheels for NHRA drag racing requirements.
New, super duty Mopar shock plates fit any '64-'76 A-Body, '62-72 B-Body, '64-'72 C-Body and '70-'74 E-Body equipped with standard 3" axle tubes. Will not fit 7.25" rearends.
All driveshaft assemblies are built with seamless 4130 cr-mo tubing, 29 spline 727/A833 slip yokes, heavy duty 1350 U-joints, then dynamically balanced.
All S60 Rear Assemblies come fully set-up with housing ends, axle bearings, breather vent, filler plug, drain plug and Lucas oil. Your choice of width, perches, axles, carrier, studs, pinion yoke, cover, and pinion snubber. Uses Dana 60 components.
Mopar Tapered Axle Bearing Package
Package includes (10) 3/8"-24 x 1 1/4" housing studs and nuts used to secure Mopar 8 3/4" and For 9" third-members to their housings.
