• Pinterest

Rear Axle Brake Line Selector

Overall width of rearend to the nearest 1/8" measured from drum-to-drum or disc-to-disc.

Select the previous option first

Select the previous option first

If you purchase a flex hose and your existing rearend uses a crimped-on hose, you must also add a new "Tee" below

Select the previous option first

Select the previous option first

In stock

Pre-bent brake lines are available in OEM or stainless material.

Brake lines will come semi-pre-bent if a custom width rearend and/or rear disc brakes are selected.  Customer must bend, cut and flare one end.

OEM material is recommended for semi-pre-bent lines, or if you plan to modify pre-bent lines, as the stainless version is difficult to bend and flare.

OEM rubber, or DOT stainless rearend to body flex hoses are available.

You can choose rearend combinations that were not offered by the factory, so please make sure you know what you have before you order.  What you have and what the car was built with are often two different things. 

See also Front and Front to Rear Brake Line Selectors.

Customers also bought . . .

 

Mopar A, B, and E Body front to rear brake line selector allows you to pick hard lines and proportioning/brake valves for your car and disc or drum combination.

In stock

Mopar A, B, and E Body front brake line selector allows you to pick hard lines and flex hoses for your car, master cylinder, and disc or drum combination.

In stock

$298.00

30 or 35 spline, 5 X 4 1/2" bolt pattern axle package for 8 3/4" or Dana 60 with lug studs and Green sealed wheel bearings INSTALLED.