DoctorDiff Drivetrain

.

Products Products

Drivetrain

Sort by Alphabetical: A to Z
48 Per Page
"Powr-Lok" Clutch Pack
$117.00
Rearend: Aftermarket 8 3/4", Dana 60, OEM 8 3/4" (includes 2 thin plates)
"Powr-Lok" Internal Parts Kit
$185.00
Application: 30 Spline Dana 44 or Mopar 8 3/4", 32 Spline Dana 60/70, 35 Spline Dana 60/70
"Powr-lok" Thrust Buttons
$20.00
(8) 8 3/4" Clutch Sure-Grip LH thread case-half bolts
$69.00
1350 to 7260 Conversion U-Joint
$50.00
1350 to 7290 Conversion U-Joint
$50.00
1350 Transmission Slip Yoke
$95.00
Spline: 26 Spline for 904 automatic, 29/30 Spline for 727 automatic/A883 manual
1350 U-bolt Pinion Yoke Package
$70.00
Pinion Spline: 10 Spline 8 3/4", 29 Spline 8 3/4" and all 9 1/4", 29 Spline Dana 60
7260 to 7290 Conversion U-Joint
$30.00
7290 Transmission Slip Yoke
$85.00
7290 U-Bolt Pinion Yoke Package
$70.00
Pinion Spline: 10 Spline 8 3/4", 29 Spline 8 3/4" and all 9 1/4", 29 Spline Dana 60
8 1/4" Bearing Rebuild Kit
$100.00
8 1/4" Ring and Pinion
$195.00
8 1/4" Spicer "Trac-Lok" Differential
$425.00
8 3/4 Carrier Bearings and Races (pair)
$43.00
Bearing Inside Diameter: 1.8" (early style), 2.0" (late style)
8 3/4" 489 Case Crush Sleeve Eliminator
$40.00
8 3/4" 489 Case Third Member
$1,320.00
8 3/4" bearing rebuild kit
$85.00
Casting Number (last 3 digits): 741, 742, 489 w/Crush Sleeve, 489 w/Billet Crush Sleeve Eliminator
Carrier/Suregrip Type: All others (2.0" bearing journal), Clutch suregrip or pre-1969 open differentials (1.8" bearing journal)
Bearing Manufacturer: Koyo USA/Japan, Timken USA
8 3/4" Clutch Type Sure-Grip ("Powr-lok")
$395.00
I am using: Green non-adjustable wheel bearings, OEM adjustable wheel bearings
8 3/4" Cone Sure-Grip Shim Pack
$25.00
8 3/4" Eaton Truetrac Differential
$575.00
8 3/4" Helical Gear Sure-Grip ("Sure-Trac II")
$595.00
8 3/4" Inner Axle Seal
$4.00
8 3/4" Lightweight Spool
$100.00
Spline: 30 Spline, 35 Spline (requires custom axles)
8 3/4" Minimum Installation Kit
$43.00
Last 3 Digits on Casting: 489 w/Crush Sleeve, 489 w/Solid Pinion Bearing Spacer, 741, 742
8 3/4" Nodular Iron Casting
$275.00
8 3/4" or Dana 60 Pinion Yoke Repair Sleeve
$15.00
8 3/4" Pinion Seal
$8.00
Application: For 741 or 489 Case, For 742 Case
8 3/4" Pinion Snubber
$45.00
8 3/4" Ring and Pinion
$195.00
Case and Pinion Spline: 489 (10 spline), 489 (29 spline), 741 (10 spline), 741 (29 spline), 742 (10 spline)
Ratio: 3.23, 3.55
Manufacturer: DoctorDiff Gear
8 3/4" Spanner Wrench
$35.00
8 3/4" Third Member Gasket
$5.00
Material: Pink non-stick, Standard
8 3/4" Wheel Lug Studs
$20.00
Chevy 8.2", 8.5" and 12 bolt passenger car axle bearing kit
8.25" Chrysler axle bearings (PAIR)
$40.00
9 1/4" Spicer "Trac-Lok" Differential
$425.00
A-Body 8 3/4" Housing & Axle Package
$775.00
Aluminum Ford 9" Casting
$275.00
AMC 1 Piece Passenger Car Axle Pkg (pair)
$298.00
AMC 20 Green Wheel Bearings (PAIR)
$98.00
Axle Pkg '55-'64 Chevy Passenger Car (17 spline)
$295.00
Axle Pkg 7 1/4" A-Body Mopar 5X4 1/2" Bolt Pattern (pair)
$298.00
Axle Pkg Chevy 12 bolt (pair)
$200.00
Axle Pkg Custom Length Mopar 5X4 1/2" Bolt Pattern (pair)
$305.00
Application/Spline: 8 3/4" w/30 spline carrier, 8 3/4" w/35 spline spool (not Mark Williams), Dana 60 w/30 spline carrier, Dana 60 w/35 spline carrier
Custom Length Ford 9" 31 Spline Axle
Axle Pkg Cut-Your-Own Ford 9" 31 Spline (2.436" Brake Pilot/Register)
$295.00
Axle Pkg Cut-Your-Own Ford 9" 31 Spline (2.780" Brake Pilot/Register)
$295.00
Axle package shown with Green Bearing installed
Axle Pkg Stock Length Mopar 5X4 1/2" Bolt Pattern (pair)
$298.00
Application/Spline: 8 3/4" w/30 spline carrier, 8 3/4" w/35 spline spool (not Mark Williams), Dana 60 w/ 30 spline differential or spool, Dana 60 w/35 spline carrier
Billet Steel Housing Ends
$85.00
Dana 60 "Trac-Lok" Differential
$595.00
 Prev
1 2
Next