.
AMC 20 Green Wheel Bearings for 1 piece aftermarket axles
QA1 JJC-AC0320 performance driveshafts are built with 3.2" diameter carbon fiber tubing, wound in-house with a resin specifically designed for high performance applications
Ten press-in wheel lug studs for Mopar 8 3/4" axle shafts.
Cast iron 7290 slip yoke fits Mopar 727 automatics and 29/30 spline A833 4 speed transmissions.
DoctorDiff 5 x 4.5" bolt pattern conversion axles fit '62-'72 A-body 7.25" rearends.
New, nodular iron Ford 9" case includes forged steel caps and billet adjusters installed. Choice of carrier bore for 28/31 spline axles or 35 spline axles.
Motive Performance Ford 9" street/strip 3.50, 3.70 or 4.11 ring and pinions set up easily and run quiet
New, aluminum Ford 9" case includes forged aluminum caps and billet adjusters installed. Choice of carrier bore for 28/31 spline axles or 35 spline axles.
Premium quality Dana 60 cover gasket
Ford 9" third member with original case, pinion support, and 1330 pinion yoke. New forged steel traction lock, Koyo bearings, and your choice of gears.
Handy kit includes the small parts required to perform a Dana 60 gear swap.
28 spline Ford 8" Traction Lock posi.
Mopar 8.25", 8 1/4", 8 3/8" Bearing Rebuild Kit
Koyo carrier bearings for Dana/Spicer 60.
Dana 60 pinion seal
Axle packages for '67-'71 Camaros, '64-'72 Chevelles, and '67-'70 Novas with CHEVY 12 bolt C-clip rearends
Super duty FORGED STEEL 1350 or 1330 28 spline U-bolt pinion yoke (4" long). Yoke is black oxide plated for corrosion protection. Package includes U-bolts.
Ford 9" aluminum third member w/ heavy duty case, "Daytona" pinion support, 1350 pinion yoke, 31 spline traction lock, Koyo bearings, and choice of gears.
28 or 31 spline Ford 9" Traction Lock posi.
Dana 60 Eaton Truetrac fits standard rotation, 35 spline Dana 60 rearends equipped with 3.54-4.30 street gears.
Ford 9" solid pinion bearing spacer kit includes shims used to set pinion bearing preload. Kits for standard or heavy duty "Daytona" pinion support.
8.25" Chrysler axle bearing kit includes 2 Precision bearings and 2 seals.
Ford 9" nodular iron third member w/ heavy duty case, "Daytona" pinion support, 1350 pinion yoke, 31 spline traction lock, Koyo bearings, and choice of gears.
Lightweight 35 spline spool fits all Dana 60 castings and all ratios.
9 1/4 " Spicer "Trac-Lok" 2-pinion style clutch sure-grips work nicely for street cars and half ton pickups making under 350 hp.
3/8"-24 x 1 1/4" T-bolts and nuts
Reproduction '66-'68 or '69-'72 Mopar passenger car Dana 60 pinion snubber.
Precision Set 20 (A20) tapered wheel bearing kit includes 2 bearings, 2 lock rings, 2 external oil seals and your choice of 2 old style (1/2" bolt holes) or late (3/8" holes) big Ford bearing retainers. Fits Torino, big Ford new style housing ends.
Package fits aftermarket axles tapped for 1/2" screw-in studs. Use with disc brakes and thick wheels for NHRA drag racing requirements.
Choose ring gear bolts for Mopar 8 3/4" or Dana 60
Pair Ford 8" and SMALL Ford 9" wheel bearing kit
Powder-coated OEM Mopar passenger car 8.75" pinion snubber (various years).
DoctorDiff Dana 60 heavy duty 4-pinion clutch sure-grip ("Powr-Lok") posi includes upgraded 1 piece 35 spline side gears. Unit is built with OEM Spicer clutch pack.
Fully machined 4130 cr-mo 1350 slip yoke fits Mopar rear wheel drive applications.
Dana 60 bearing rebuild kit includes quality Koyo bearings
3 degree pinion angle shims (wedges) fit Mopar 8 3/4", Ford 9", Dana 60, Dana 44 and any axle housing with 2.5" wide leaf springs and 5/16" center bolt.
8 3/4" Spanner Wrench carrier bearing side adjuster wrench
Dana 60 Spicer "Trak-Lok" 2-pinion style clutch sure-grips work nicely for street cars making under 400 hp
New, Mopar 8 3/4" nodular iron 489 casting includes forged steel caps and billet steel adjusters.
New, super duty Mopar shock plates fit any '64-'76 A-Body, '62-72 B-Body, '64-'72 C-Body and '70-'74 E-Body equipped with standard 3" axle tubes. Will not fit 7.25" rearends.
Handy kit includes the small parts required to perform a Mopar 8 3/4" gear swap.
Your choice of quality Koyo carrier bearings for either late or early model 8 3/4" third members.
Package includes (10) 3/8"-24 x 1 1/4" housing studs and nuts used to secure Mopar 8 3/4" and For 9" third-members to their housings.
Professional tool removes ALL popular carrier bearings quickly and easily with no damage to the bearing.
Hard to find combination U-joint mates a small 7260 Mopar driveshaft to a large 7290 Mopar yoke.
Choose pinion nut and washer for Dana 60, Mopar 9 1/4", or Mopar 8 3/4" pinions.
Premium quality Mopar 8 3/4" third member gasket.
Super duty FORGED STEEL 7290 U-bolt yoke
Eliminate your troublesome stock 2-piece axles with DoctorDiff ONE-PIECE, CUT-TO-FIT 29 spline axle shafts. Shafts are back oxide plated for corrosion resistance.
OEM Mopar 3/8"-24 x 1 1/4" housing end studs and nuts used to secure Mopar 8 3/4" and passenger car Dana 60 brake backing plates and wheel bearings.
Motive Performance ring and pinion fits Dana 60 rearends with standard 29 spline pinion yokes
All driveshaft assemblies are built with seamless 4130 cr-mo tubing, 29 spline 727/A833 slip yokes, heavy duty 1350 U-joints, then dynamically balanced.
Ford Motorcraft limited slip additive is recommended for Mopar 8.75" and Dana 60 clutch or cone style sure-grips. 1 bottle controls clutch sticking and chatter.
Lightweight 30 and 35 spline spool fits all 8 3/4" castings and all ratios.
Hard to find combination U-joint mates a standard, big 7290 Mopar driveshaft to a large, heavy duty Spicer type 1350 (U-bolt) yoke.
Spring perches fit GM 12 bolt, Mopar 8 3/4", Dana 60, Ford 9" and other rearends.
8 3/4" billet steel housing ends fits Mopar spec brakes and MO-400/ST-400 snap-ring style Green wheel bearings
"Powr-Lok" clutch pack includes the plates and discs necessary to rebuild a Mopar 8 3/4" or Dana 60 clutch-type differential.
1541 hardened steel axles are ideal for building custom 9" rearends. Cut to Fit.
Zinc plated vent bolt retains the brake tee located on most Mopar rear wheel drive vehicles
FORGED STEEL 1350 U-bolt yoke for Dana and Mopar 8 3/4" and 9 1/4" pinions.
Mopar 8 3/4" 489 Case Crush Sleeve Elminator
Premium quality Mopar 8.75" pinion seal. Choose 742 or 741/489 case
8.75" Eaton True-Trac fits all 8.75" castings all ratios and all stock axles.
For Dana 60, Dana 44 or Mopar 8 3/4. BRAND NEW PARTS FIT HEAVY DUTY, 4 SPIDER GEAR TYPE ("POWR-LOK") SUREGRIP UNITS
Mopar Tapered Axle Bearing Package
Mopar A-Body 8 3/4" Housing & Axle Package
Includes gaskets, and seals
30 or 35 spline, 5 X 4 1/2" bolt pattern axle package for 8 3/4" or Dana 60 with lug studs and Green sealed wheel bearings INSTALLED.
All S60 Rear Assemblies come fully set-up with housing ends, axle bearings, breather vent, filler plug, drain plug and Lucas oil. Your choice of width, perches, axles, carrier, studs, pinion yoke, cover, and pinion snubber. Uses Dana 60 components.
8 3/4" ring and pinions for 741, 742, or 489 cases. Various ratios.
New, nodular iron 489 casting built with forged steel caps, billet adjusters, crush sleeve eliminator and choice of ratio, yoke, clutch sure-grip or spool.
Mopar 8 3/4" 489, 741, or 742 case bearing rebuild kit
Mopar Green Bearings for 8 3/4" and Dana 60 rearends
Reproduction 8 3/4" clutch sure-grip ("powr-lok") includes upgraded 1 piece 30 spline side gears and 4340 cr-mo spider gears
